|Ring display pin courtesy of Popko Shop, click through to get to original tutorial|
The pin is for a tutorial on how to make your very own ring display box/tray/thing from a cutlery tray. Now rewinding, when we first moved into our house, I bought a new cutlery tray for the kitchen, only to find it was slightly too big to fit in our drawer. I threw it in the back of my car to eventually return to Bed, Bath, and Beyond, but let’s face it, that place can sometimes seem like the 6th circle of hell, and I don’t like going in unless I have $250 lying around that I want to throw away.
Thus, much to the annoyance of my husband, I never made it around to returning the cutlery tray. Fastfowarding, when I saw this tutorial, I was like, AHA! Finally something I can do with that tray! Now I can make a super cheap ring display box AND avoid ever stepping into Bed, Bath, and Beyond.
The main two items you need are any sort of cutlery tray type thing and some upholstery foam, which I found at Joann.
Some scissors and a box cutter or a knife are also helpful, along with some relatively thick fabric. If your fabric is too thin, you’ll be able to see the green foam through it.
Use your scissors or a knife to cut out foam pieces to fit in the cutlery tray divisions. In the pinned tutorial, she uses just one big tray, so it’s a lot easier. Sadly I was working with a tray with lots of divisions, so I had a lot of cutting to do. I was sort of worried my final result might look odd with all the divisions, but I think it turned out just fine (you’ll see soon).
Here’s my box with the foam pieces fitted in. I then took my knife and started slitting lines through the foam where I wanted to be able to sit the rings. I sliced the lines about half-way into the depth of the foam, and I tried to keep my lines straight (but didn’t really succeed) and evenly spaced.
After I was done cutting lines, I took my fabric and cut it into pieces, and basically stuffed in into the sliced lines, folded it under the pieces of foam, and stuffed it all into the box. I used the point of my scissors to really stuff the fabric in there and make it as taut as I could get it. I chose a basic neutral colored muslin fabric. I planned to paint my tray a bright green and I really wanted my rings to be able to pop against a non-distracting background.